用户
 找回密码
 ▷入伙户外◁

QQ登录

只需一步,快速开始

搜索
楼主: luoxz
打印 上一主题 下一主题

[器材装备] 偶的闪电战车近照(一切皆是浮云)

  [复制链接]
21
发表于 2010-11-16 22:17:51 | 只看该作者
和我的阿米尼一个色,中国红
22
发表于 2010-11-18 21:06:23 | 只看该作者
这车扛着穿越老乐山一定省劲不费力!轻啊!
23
发表于 2010-12-4 05:49:23 | 只看该作者
here is what they say about the frame itself:
Thefront half of the Epic frame is pretty much the same as the front ofthe Stumpjumper hardtail range. It's M4 tubing, with the same funkycurved downtube going into the headtube. The back half is where the funreally starts. Rather than put the shock in the front triangle,Specialized have stuck it in the back between the seat cluster and reardropout. The main reason for this is that the Brain (about which morelater) needs to be near the back axle so it makes sense to put theshock there too. A handy side benefit is that the front triangle staysopen and there's space for two bottles in there, just like hardtails.The seat tube bottle mount is a little short on space for a 750mlbottle, but there's a third mount under the down tube and a fourth onebehind the seatpost (one of the bosses is on an extra bolt-on collarthat goes around the post).
You may have seen a design similar to this before. Halfords' Carrerarange last year featured the Bugaboo featuring a shock placement justlike the Epic (no cunning shock gubbinses, though). There is a tenuousconnection - the Bugaboo was a Merida design, and Merida own a chunk ofSpecialized. Despite the initial similarity, though, there are some keydifferences between the two designs.
For a start, the Bugaboo had an adjustable upper link with threetravel options which the Specialized does without - it's fixed at 90mm.Specialized have also gone to the trouble of mounting the shock onspherical bearings at each end. These allow the rear end of the bike todeflect sideways or twist or not travel exactly in a vertical planewithout transferring any undue loads to the shock. All of thesuspension pivots have sealed cartridge bearings.
Mud room is adequate if not massive, and you're getting the commonfull sus "shelf" behind the bottom bracket to collect gunge. The shockalso receives more than its fair share of muck - it didn't seem to mindduring our test period (we just had to excavate a bit to find therebound adjuster) but we can't help thinking that it's not the bestplace for a shock from a cleanliness point of view.

Brainbox. Well, more of a tube
And then of course there's the Brain. This is another of thoseFox/Specialized developments like last year's Itch switch travel adjustgizmo. The Brain is pretty cunning. It's essentially an automaticlockout for the rear shock. Inside the sticky-up canister is a valve, aweighted piston and a spring. The spring holds the valve closed,locking out the rear suspension. But hit something sufficiently hardwith the back wheel and the weighted piston accelerates upwards,popping the valve open and allowing the suspension to compress. Thevalve will stay open until the suspension stops moving at which pointit closes and locks out the suspension again. The Brain is right downnear the rear axle and angled backwards to line up with the axle pathin the first part of the travel. Only a bump hitting the back wheelwill trigger it - you can bounce on the seat as much as you like andnothing will happen.
The idea is that the Epic is effectively a hardtail until the groundreaches a certain level of bumpiness at which point it becomes a shorttravel full suspension bike. Although not actually all that short -90mm is quite respectable.
You can't help but be impressed by the amount of work that's goneinto the Epic frame. Everything's butted and shaped and we were mosttaken by the laser-engraved annotations on all the bits of the rearsuspension saying things like "This side out" so if you take the thingapart you can get it all back together again the right way up..


24
发表于 2011-4-13 17:33:38 | 只看该作者
敬礼
25
发表于 2011-4-13 20:34:44 | 只看该作者
越折腾越精彩。
26
发表于 2011-4-13 22:14:01 | 只看该作者
我也想折腾,    不知怎么折腾啊!
27
发表于 2011-4-14 08:08:01 | 只看该作者
等待XX牙盘的PP更新,欢迎来到2x9的时代

话说我也换了easton的燕把,现在感觉怪怪的
28
 楼主| 发表于 2011-4-14 08:45:51 | 只看该作者
本帖最后由 luoxz 于 2011-4-16 19:39 编辑

最新配置清单如下:(红色为更换升级的配件),随后发布新照片。
车架:闪电EPIC M4
碗组:KING(仿)
前叉:FOX 32 100X 智能
花鼓:CHRIS KING32孔碟刹六钉
车圈:ZTR355
幅条:DT
刹车:FORMULA K24
碟片:HOPE浮动160MM+140MM
牙盘:SRAM XX 碳纤42T2片
自锁:SHIMANO XTR959 SPD
飞轮:SHIMANO XTR970
指拨:SRAM X0 转把
后拨:SRAM X0 碳臂
前拨:SHIMANO XTR970
车把:EASTON EC90 碳纤 31.8MM
把套:Bontrager race x lite 海绵
把立:THOMSON ELITEX4 0度/31.8MM/100MM
车座:FIZIK GOBI XM TI轨
座杆:KCNC TI 8000
座夹:EXTRALITE
链条:SHIMANO XTR7701
线管:SHIMANO XTR
轮胎:MAXXIS 310
内胎:MAXXIS 超轻120g版本
垫圈:天中单车VIP-YOUBIKE订制







IMG_0025.jpg (46.41 KB, 下载次数: 0)

IMG_0025.jpg

IMG_0026.jpg (53.64 KB, 下载次数: 0)

IMG_0026.jpg

IMG_0027.jpg (51.57 KB, 下载次数: 0)

IMG_0027.jpg

IMG_0028.jpg (52.65 KB, 下载次数: 0)

IMG_0028.jpg

IMG_0029.jpg (48.5 KB, 下载次数: 0)

IMG_0029.jpg

IMG_0031.jpg (68.62 KB, 下载次数: 0)

IMG_0031.jpg

IMG_0018.jpg (78.54 KB, 下载次数: 0)

IMG_0018.jpg

IMG_0019.jpg (74.46 KB, 下载次数: 3)

IMG_0019.jpg

IMG_0020.jpg (68.75 KB, 下载次数: 0)

IMG_0020.jpg

IMG_0021.jpg (59.52 KB, 下载次数: 0)

IMG_0021.jpg

IMG_0022.jpg (68.48 KB, 下载次数: 0)

IMG_0022.jpg

IMG_0023.jpg (77.93 KB, 下载次数: 0)

IMG_0023.jpg

IMG_0024.jpg (59.76 KB, 下载次数: 2)

IMG_0024.jpg
29
发表于 2011-4-14 14:41:05 | 只看该作者
牛车  神器啊
30
发表于 2011-4-14 14:43:02 | 只看该作者
现实中暂时不敢想  夜晚做梦时偶然有点想法
您需要登录后才可以回帖 登录 | ▷入伙户外◁

本版积分规则